Acrylic Putty

A premium acrylic-based putty designed for better filling and less shrinkage than conventional nitrocellulose putties. It is designed for application to spot locations and for filling pits, deep scratches and other surface irregularities on metal. The product can be applied over Primer-Surfacer or sealer. Acrylic Putty is not recommended for use directly under colour coats.

Application

• Mix thoroughly before using.
• Apply with a flexible putty knife or plastic squeegee.
• Apply thin even coats as needed, allowing 10-15 minutes between coats. This will provide better filling than one heavy coat.
• Re-coating: Allow to air dry hard 30-45 minutes before sanding and recoating with primer.

Clean-up: Use Thinner R7K128.